David, You shouldn't have to. ESPECIALLY on a new 'B'. Or is that another one of their "features"? The dealer's tech should have taken care of that before it left the store!!!! IMO! Avery At 10:23 PM 5/25/2006, you wrote: >I did consider that but didn't have the appropriate dispenser and >was hoping to avoid gluing the flange bushings. > > >David Love >davidlovepianos at comcast.net >-----Original Message----- >From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] >On Behalf Of Jon Page >Sent: Thursday, May 25, 2006 7:56 PM >To: pianotech at ptg.org >Subject: Clicking drop screws on a new Steinway > > >...drop screws are very loose, turning with almost no resistance > and it appears, > >... clicking on some notes. Anyone run into this recently or have > a simple fix? > >Thin CA glue > >-- >Regards, > >Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060525/49ee4baa/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC