I did consider that but didn't have the appropriate dispenser and was hoping to avoid gluing the flange bushings. David Love davidlovepianos at comcast.net -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jon Page Sent: Thursday, May 25, 2006 7:56 PM To: pianotech at ptg.org Subject: Clicking drop screws on a new Steinway >...drop screws are very loose, turning with almost no resistance and it appears, >... clicking on some notes. Anyone run into this recently or have a simple fix? Thin CA glue -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060525/fc8280bf/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC