This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Those numbers are thousandths of an inch. The 48 is 0.048" etc. =20 dp=20 =20 David M. Porritt dporritt@smu.edu ________________________________ From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Brian Doepke Sent: Tuesday, January 10, 2006 7:06 AM To: 'Pianotech' Subject: works for me.. =20 Just sharing an idea that worked for me last night. After getting a new set of flange burnishing tools, I found that it was kind of tricky to re-insert them into the cloth case. The long needles would catch on the cloth. I measured and then cut some plastic drinking straws and slid one into each needle pouch. The pouch "downbearing" holds the straws in place and now the tools slide right in with out the hassle of getting caught on the interior material. =20 Also, does any one know the actual diameters of these tools? Right now all I have are the numbers 48, 49, ect. that are printed on the handles. =20 Brian P. Doepke =20 AAA Piano Works, Inc. 260-432-2043 260-417-1298 =20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d6/f8/4f/b3/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC