This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Yeh, I know fustrating in it not. Please see #309 Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: David Ilvedson=20 To: pianotech@ptg.org=20 Sent: Tuesday, January 10, 2006 8:40 AM Subject: RE: works for me.. That is a pet peeve of mine also...I wish the kit had little elastic = straps to hold the handles and a tie for rolling up...I use a rubber = band. =20 David Ilvedson, RPT Pacifica, California -------------------------------------------------------------------------= ----- Original message From: "Brian Doepke"=20 To: Pianotech=20 Received: 1/10/2006 5:06:28 AM Subject: works for me.. Just sharing an idea that worked for me last night. After getting a new set of flange burnishing tools, I found that it = was kind of tricky to re-insert them into the cloth case. The long = needles would catch on the cloth. I measured and then cut some plastic drinking straws and slid one into = each needle pouch. The pouch "downbearing" holds the straws in place = and now the tools slide right in with out the hassle of getting caught = on the interior material. =20 Also, does any one know the actual diameters of these tools? Right = now all I have are the numbers 48, 49, ect. that are printed on the = handles. =20 Brian P. Doepke =20 AAA Piano Works, Inc. 260-432-2043 260-417-1298 =20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/5d/3d/d0/5d/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC