---------------------- multipart/alternative attachment List There was some discussion lately about carrying cases for Verituners, and some discussion about tool cases from Menards. I now meld those two discussions into one! This week I bought an aluminum tool case from Menards for $19.97. It comes with a tool palette in the lid and a foam rubber insert. This foam rubber insert is the coolest thing I've ever seen, especially for $19.97. It completely fills the case, but has been scored or perforated, with tiny squares that can be removed. I tore away half of it, so that now half the case was filled with foam rubber, then removed the interior of the foam rubber so that the opening perfectly conforms to my Verituner. This makes the Verituner cushioned by the foam rubber on four sides, and even the bottom of the case is soft rubber on the inside. So I put it in face down, and it is completely protected. I never had a case that would carry the VT and my tuning tools, but now I have one for $19.97. It also comes with little divider walls, so the other side now has compartments for my tuning hammers, mutes, and tools that I use on a regular basis. I did have to go out to the car yesterday to get a tool I used to carry in my old tuning kit (the VT takes up too much room for me to carry everything I used to), but carrying one case for the VT and my tuning tools feels like a luxury! And the smart aluminum styling says "Professional", so I looks good, too! One Happy Camper, Tom Sivak Chicago P.S. Hope this wasn't already covered in the previous discussion...I didn't read the entire thread... ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/94/30/ee/d6/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC