This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi,Aart! Regarding Harpsichord tuning:don't forget to have all ot at least a few different sizes of string wires.Ask me how I know!! Good Luck!!! {I really mean it!!} Isaac _____ From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Joe And Penny Goss Sent: Tuesday, February 14, 2006 9:28 PM To: Pianotech List Subject: Re: Harpsichord tuning You will need the harpsichord hammer T's are good. Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Aart <mailto:aartinamerica@optonline.net> in America Piano Services To: Pianotech List <mailto:pianotech@ptg.org> Sent: Tuesday, February 14, 2006 6:51 PM Subject: Harpsichord tuning Hello All. I received a call to tune a Harpsichord (dual manual keyboard Sperrhake Passau made in Germany). My First, will my tuning hammer fit the pins? if not I'll order the correct tip or hammer. Any advice is greatly appreciated and thanks to ALL who responded to my post regarding Bluthner tunings. Thanks, Aart Aart in America Piano Services Hoboken, N.J. 07030 201 406 2594 aartinamerica@optonline.net ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a5/b9/58/ef/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC