Stripping tenor section for over ring

[Dean May]

Ditto to what David said. 

You should also double check the sustain and bass sustain pedals. Often
these are adjusted to tight with no lost motion, causing the dampers to
be slightly lifted in one section. 

Dean
Dean May             cell 812.239.3359
PianoRebuilders.com   812.235.5272
Terre Haute IN  47802


-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf Of Sherry
Sent: Sunday, September 04, 2005 4:13 PM
To: Pianotech
Subject: Stripping tenor section for over ring

Hi,
    One of my clients has a Baldwin Studio with a terrible over
ring--especially strong coming from the D2 area.  I'm going to try
stripping
the tenor section but I'm not sure where to place the stripping on the
strings from a North/South perspective.   I'd appreciate any input.
    Thanks,

    Sherry

_______________________________________________
pianotech list info: https://www.moypiano.com/resources/#archives