Hi Ron, I am restringing a Baldwin R. I do have the Baldwin Technical specs on Downbearing. The restringing procedure mentions setting down bearing. This is where I would like to know what tool is best to raise or lower the strings according to the specs. Jack Houweling ----- Original Message ----- From: "Ron Nossaman" <rnossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Friday, October 21, 2005 8:43 PM Subject: Re: Accu-just System > >> I have a few Questions about the Baldwin with the Accu-just System. I >> would like to know if there is a special tool for setting downbearing on >> Accu-just hitch pin? When adjusting do you have to release tension of the >> string? >> Jack Houweling > > Hi Jack. > Time out ----- orient. > > There is no special tool, other than a bubble gage to directly measure the > bearing angle. It is not necessary or desirable to lower string tension > for the adjustment. > > Now, what are you planning on adjusting, within what circumstances, and > why? > > Ron N > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > > > -- > Internal Virus Database is out-of-date. > Checked by AVG Anti-Virus. > Version: 7.0.338 / Virus Database: 267.9.3/56 - Release Date: 7/22/2005 > >
This PTG archive page provided courtesy of Moy Piano Service, LLC