At 04:55 PM 10/5/2005 -0700, you wrote: >Can you describe the creak? Wood to wood squeaks are often helped my >teflon powder. Consider the nails/wood might be the cause of the >creak. Dismantle the soapbox, replacing each nail in its respective >hole. Label wood pieces and make a diagram for future >assembly. Teflon all wood to wood contact points. Protek thick lube >on each nail before assembly. If a real problem, bushing cloth around >the nail works pretty good. The Renner stuff. You might consider >brackets to re-inforce the soapbox structure. Then assemble and get back >on that soapbox...;-] > >David I. David, David, David... So labor intensive!! Just scoop out about a quart from your 55 gallon drum of CA glue and douse soapbox liberally. (Make sure it is in it's permanent position first) DO NOT USE ACCELERANT! See? Wasn't that easier? ;-} anoN
This PTG archive page provided courtesy of Moy Piano Service, LLC