Mark, Works for me as well. However you might want to step it up a notch and use Prolube which is more suited for keypins, keybushings, and all friction points. I agree with you about why would you want to introduce a goopy substance when much better alternatives to the solution are readily available. Tom Servinsky ----- Original Message ----- From: "Mark Schecter" <schecter@pacbell.net> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, November 28, 2005 11:58 PM Subject: Re: Key Bushing Lubricant >I for one don't know why you would want to use something as goopy as animal >fat, even in a very thin layer. I think it will eventually get >sticky-sludgy, and what good is that? Why don't you use ProTek on the >bushings and the keypins? It's clean, slippery, and repeatable. I wet the >bushings, and use a cloth to wipe it onto the keypins. Since it coats the >cloth fibers, I think it lubricates better than powder. Barring a too-tight >fit, you won't have friction problems. Works for me. > > -Mark > > Farrell wrote: >> Does anyone know anything about using a tallow/graphite or >> tallow/microfine-Teflon-powder mixture as a key-pin/key-bushing >> lubricant? Anyone know where to find a suitable form of tallow? >> Terry Farrell >> FWIW: This isn't my idea! > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC