This is a multi-part message in MIME format. ---------------------- multipart/related attachment ------_=_NextPart_002_01C5EC3B.AFCE0495 Avery: =20 A few keys on this piano were ok, many were in need of steaming/glue sizing but 28 or 30 (I lost count) were past that stage. It is a piano that has been in a classroom so has not gotten the attention that it should have had. When we have more work than we can get done, the priorities sometimes get skewed. =20 dp =20 David M. Porritt dporritt@smu.edu ________________________________ From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Avery Todd Sent: Thursday, November 17, 2005 8:02 PM To: Pianotech Subject: Re: Chucky keys =20 Dave,=20 Have you tried steaming them first? Just curious. I find that when I steam out bushings=20 from the center rail, I usually end up having to ease the balance rail holes.=20 Avery=20 At 12:19 PM 11/16/05, you wrote: I've just been working on a piano that had some chucky keys. Some could be fixed by glue-sizing, but 28 needed a kerfs cut and veneer inserted. Whenever I've done this before I've just placed the kerf by hand and it generally worked ok. This time I figured a way to put the kerf in exactly the right spot. I put the key in the vice and inserted a balance rail pin and held it firmly to the back of the hole. I then put the saw right against the pin and started the cut. Each of these came out exactly right with no chucking and the keys lined up perfectly. =20 I'm probably the last one in the world to discover this, but it worked! =20 =20 dp __________________________ David M. Porritt, RPT Meadows School of the Arts Southern Methodist University Dallas, TX 75275 dporritt@smu.edu =20 ------_=_NextPart_002_01C5EC3B.AFCE0495 An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/36/11/8d/11/attachment.htm ------_=_NextPart_002_01C5EC3B.AFCE0495-- ---------------------- multipart/related attachment A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 55104 bytes Desc: image001.jpg Url : https://www.moypiano.com/ptg/pianotech.php/attachments/df/24/8b/20/attachment.jpe ---------------------- multipart/related attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC