String replacement

Michael Gamble michael@gambles.fsnet.co.uk
Thu, 17 Mar 2005 15:46:09 -0000


This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Hello Matthew
I usually use a very small mole wrench (vise-grips to you) which can be =
clamped lightly to the bridge puin. Use another on the hitch pin for =
good measure. Don't forget to tap down the hitch loop on its pin before =
finally bringing up to pitch.
Regards
Michael G.(UK)
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/28/e3/6f/34/attachment.htm

---------------------- multipart/alternative attachment--



This PTG archive page provided courtesy of Moy Piano Service, LLC