Restoring Collard & Collard Grand

[Peter Joris]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Hi List,

 

Currently I am restoring a Collard & Collard Grand Serial: 16016 this should
date between 1830 and 1840 I think.

There is a number on the plate "K2" is this the type number?  It is about
183cm (6ft) long.

 

Is there anybody out there who has done this before?

Im looking for information about what kind of strings to use for the
restinging, what felt to use for refelting the hammers etc.

Actually I can use any tip available, this the first time I am doing this,
this will be a great for learning.

 

Sound board is fine, the veneer of the case is rather bad (a lot of work),
the pinblock feels still good on 1 or 2 loose pins.

It was tuned to A440 and it holds very well.

 

I am thinking of a rescale, so it can be tuned at A440 afterwards with a
lower tension, doess anybody has experience with this?

 

Also I would like to take out the plate for refinishing but it goes all the
way into the case wood, I did not take any veneer of to see how it is
constructed, maybe any of you know this?

 

Any help will be very much appreciated,

 

Kind regards

Peter Joris

Pianotuner (maybe becoming rebuilder)

 

 

 

 

 


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/7b/74/53/90/attachment.htm

---------------------- multipart/alternative attachment--