Building Soundboard Panels

antares antares@euronet.nl
Mon, 31 Jan 2005 21:25:54 +0100


---------------------- multipart/alternative attachment

On 31-jan-05, at 21:17, Terry wrote:

> FWIW: Piano technician workday human interest moment...............
> =A0
> I can't accurately convey the satisfying feeling I get jointing the=20
> edges of panel flitches and then edge-gluing up a soundboard panel. I=20=

> know a number on this list do this routinely, and perhaps the thrill=20=

> will fade after my hundredth panel, but at least for now it is a true=20=

> joy (and actually, I suspect it will remain so)!
> =A0
> Below is a picture of two panels for redesigned Steinway B=A0bellies=20=

> that=A0I'm building for a client. Yesterday I did all the edge =
jointing=20
> (all done with hand planes for the smoothest, perfect-matching edges)=20=

> and glued up the subpanels. Today I have been gluing the subpanels=20
> together to make the completed panels.
> =A0
> Completed panel in top half of picture, the second panel is in my=20
> panel clamps lying flat on the table.
> =A0
> Terry Farrell

Highly inspiring Terry....


> friendly greetings
from
ANDR=C9 OOREBEEK

www.concertpianoservice.nl

Where 'music' is no harm can be


---------------------- multipart/alternative attachment
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 2418 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/5d/e2/9f/2d/attachment.bin

---------------------- multipart/alternative attachment--


This PTG archive page provided courtesy of Moy Piano Service, LLC