quality chuck for drill press

[Greg Newell]

Why not just use propane to heat up the chuck. It'll come off pretty easily 
then I'd guess.

Best,
Greg



At 10:01 AM 1/28/2005, you wrote:
>Yes, I'd be curious to know the model when it's convenient.  Now to get
>the old one off...  Maybe there is a reason not to heat it up in the
>oven first!
>
>David Love
>davidlovepianos@comcast.net
>
>-----Original Message-----
>From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
>Behalf Of Terry
>Sent: Friday, January 28, 2005 5:02 AM
>To: Pianotech
>Subject: Re: quality chuck for drill press
>
>I bought a basic Jacobs chuck. I paid just under $100. Made a huge
>difference. I know Jacobs is a well-known large chuck manufacturer. No
>doubt
>there are other good quality manufacturers. I just went to my local
>quality-tool dealer (Wholesale Tool) and asked for a recommendation. I
>recommend doing the same - do you have a good tool dealer locally?- not
>ACE
>hardware or Homer's - but rather a real place where quality-conscious
>professional contractors might shop for high-end tools - and that has
>real
>people - that know real things about tools - behind the counter (you
>know,
>like back in the old days).
>
>I just did a Goggle search on "jacobs drill chuck" and got about a
>million
>results. One of the first page is:  http://www.biscofl.com/jacobs.htm .
>Looks like they have a good assortment. If you want me to, I can take a
>peek
>at mine and see which model I ended up with.
>
>Terry Farrell
>
>
> > My drill press chuck does indeed have too much runout and I would like
> > to purchase a quality chuck and would appreciate suggestions as to
> > brands.
> >
> > David Love
> > davidlovepianos@comcast.net
>
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives
>
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives

Greg Newell
Greg's piano Forté
mailto:gnewell@ameritech.net