This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Dean, and the rest of you, Normally I would not enter into a discussion about moving/lifting pianos. My 5 foot 3 inch stature doesn't allow me to do my share in that department. However, I can attest to what Dean is saying. At the Washington D.C. Convention (can't remember which year) Les Bartlett was determined to prove that even I could lift a piano onto a dolly. He pulled on the opposite end and I lifted a Baldwin Hamilton high enough to get on a moving dolly. (I think it was Les who helped me, or perhaps it was the glass or two of Merlot that was the ticket!!) :>) Just thought I'd share..... Jeannie Jeannie Grassi, RPT Associate Editor, Piano Technicians Journal <mailto:jcgrassi@earthlink.net> mailto:jcgrassi@earthlink.net _____ From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Dean May Sent: Thursday, January 27, 2005 5:05 AM To: dave@davispiano.com; Pianotech Subject: RE: Dolly Install >>I helped a fellow in our chapter tip up a P22, and my brother helped me with a Baldwin Hamilton one time, but haven't felt the gumption to hoist myself...especially some old upright. Say, do you guys get the oldies up on end by yourselves? I've done it on occasion. It takes some practice to learn how to lock your back and arms and lift it up with your legs, but it can be done. Having someone on the other end pulling helps out quite a bit. They should put a foot on the toe block, grab as high as they can, then hold their body as far from the piano as they can. Dean ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/64/0f/80/dc/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC