Remove the action, secure the lid prop stick against the strutt. Remove lyre and bass leg, stand piano on its side on a folded pad (protecting hinges). Place other pads to receive the treble end and flip right over. With the action removed, the keybed acts as a place to grab when righting. Be mindful of where the glue might go... I glued a straight side once this way, with epoxy... only to find out that it dripped down the inside of the outer rim and glued it to the shop rug. Had a bit of rim refinishing to do :-( All in a day's work... Regards, Jon Page
This PTG archive page provided courtesy of Moy Piano Service, LLC