The spruce has resonant qualities of its own. Thump --- James Grebe <pianoman@accessus.net> wrote: > It is my understanding that the Bosey rim is not > laminated spruce but solid > spruce edge glued and end glued to gether and then > the shape is carved out > of that. That would keep the vibration back to the > SB sine there are no > plies to soak it up> > Jim > James Grebe > Piano-Forte Tuning & Repair > Creator of Handsome Hardwood Caster Cups, piano > benches, writing instruments > (314) 608-4137 > WWW.JamesGrebe.com > 1526 Raspberry Lane > Arnold, MO 63010 > BECOME WHAT YOU BELIEVE! > pianoman@accessus.net > ----- Original Message ----- > From: "V T" <pianovt@yahoo.com> > To: <pianotech@ptg.org> > Sent: Saturday, January 22, 2005 1:10 PM > Subject: circle of sound > > > > > > Hi Terry, Ric, List, > > > > The radiation from speaker cabinet panels would > not be > > desirable even if the radiated spectrum were flat, > > which it isn't. So, MDF, being lossy > (dissipative), > > is in that application a good choice (as long as > you > > don't remind yourself that you paid all that money > for > > particle board). Sustain is definitely not what > you > > want in a loudspeaker box. There is plenty of > power > > available from the amplifier to drive the speakers > and > > waste some energy in the fill material, the air > > inside, and the MDF. > > > > In contrast, a piano designer probably strives to > > direct as much of the energy into the soundboard > and > > get the least energy loss elsewhere so that the > board > > can keep vibrating as long and as vigorously as > > possible. > > > > Now, my question is: why does Boesendorfer get > decent > > results with a soft rim. Or, are the results that > > great? > > > > Vladan > > > > ============================================= > > > > I don't know Ric, I'm not sure exactly how > applicable > > it is, but the > > preferred material for high-fidelity speaker box > or > > mounting platform is > > MDF. Also, while it seems a good idea that every > part > > of the piano should > > play its role, I'm not sure that all parts need to > be > > little soundboards. > > MDF might not hold a screw well, might fall apart > > rather quickly in the > > water, but as far as just being an immobile hunk > of > > very dense stuff that > > doesn't vibrate very well - which, I think, is the > > basic function of an > > inner rim - it think it fits that bill even better > > than many hardwoods. It's > > also dimensionally quite stable (I think). > > > > Hmmmmm, an MDF pre-formed inner rim? > > > > I'm really not suggesting that, but I find it > > difficult to imagine how it > > would be a detriment to the musical properties of > a > > piano when used as a > > case material. > > > > Terry Farrell > > > > Richard wrote: > > > >> Grin.... true enough Terry.... but then that > said. > > Steinway does beleive > >> in the idea that every part of the piano should > in > > someway or another > >> contribute to the projection and quality of the > > sound. Solid hardwoods > >> cases/rims... vs papboard...? hmmm > > > > > > > > > > __________________________________ > > Do you Yahoo!? > > The all-new My Yahoo! - Get yours free! > > http://my.yahoo.com > > > > > > _______________________________________________ > > pianotech list info: > https://www.moypiano.com/resources/#archives > > > > > _______________________________________________ > pianotech list info: > https://www.moypiano.com/resources/#archives > __________________________________ Do you Yahoo!? Meet the all-new My Yahoo! - Try it today! http://my.yahoo.com
This PTG archive page provided courtesy of Moy Piano Service, LLC