Center Pin Goop

[Joe Garrett]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Terry,
After perusing the photo, I suspect you have a combination "goop". =
Possibly, the original flange bushing cloth was "impregnated" with =
graphite, al a Renner bushing cloth. Then some ijit decided to put a bit =
of "lube" on them puppies....probably WD-40. WD-40 gets gummy with age, =
in my experience. Flushing it out of metal parts is not a problem. But, =
flushing it out of wood would be next to impossible, IMO. Best Replace =
the parts, or, put the action back in and "walk", (as in run!<G>), away.
Best Regards,
Joe Garrett, R.P.T.
Captain, Tool Police
Squares R I
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8a/9d/da/77/attachment.htm

---------------------- multipart/alternative attachment--