This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Most cabinet shops carry "skins". That is the type of plywood you want. = What type of skin doesn't matter that much as it is only the top layer. = Birch is an expensive cabinet and it might be cheaper to get an oak = skin. The cabinet shop might sell you a piece so you don't have to order = a 4' x 8' sheet. Probably be $100 for a sheet of birch. For lumber yard = plywood CCX is better than CDX and is plugged and sanded on one side. = About $35 a sheet. kpiano ----- Original Message -----=20 From: Jack Houweling=20 To: pianotech=20 Sent: Tuesday, January 18, 2005 9:06 PM Subject: Re:bottom board Thanks to all who responded. I will use the Baltic Birch Plywood, if I = can find it. Jack ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d4/76/e0/1f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC