At 06:36 1/18/2005 -0500, you wrote: >Be careful about using plywood to secure a screw into - it typically does >not provide good holding power - you might want to consider a tee-nut on >the other side. > >Terry Farrell Marine grade would be more likely to hold a screw, wouldn't it? Conrad Hoffsommer, RPT, MPT, CCT, PFP, ACS, CRS. Decorah, IA - Certified Calibration Technician for Bio-powered Digitally Activated Lever Action Tone Generation Systems. - Pianotech Flamesuit Purveyor - American Curmudgeon Society - Apprentice Member and Founder
This PTG archive page provided courtesy of Moy Piano Service, LLC