---------------------- multipart/alternative attachment In a message dated 1/17/05 12:58:51 PM Pacific Standard Time, joegarrett@earthlink.net writes: I've done this on a few. There needs to be sufficient clearance for the fallboard to clear the first part of the spring. I installed mine at about a 45 degree angle w/the screw on the bottom, (just past the location of the bottom of the fallboard, in the open position.) The spring I'm referring to is for Steinways. It's about 3/8" wide and about 3 1/2" to 4" long. In this retrofit the back of the cover started to engage about 1/3rd of the the way up. I hope this helps. Best Regards, Thanks, Joe. This is what I had in mind. I've seen this in the Schaff catalogue. Dave Stahl ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c3/b7/b2/3c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC