This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Tom asked: "I am regulating an old Kimball grand and it has = Brambach-style knuckles. I=20 don't know exactly where to position the jack under one of these. Can=20 someone enlighten me on this?" Thanks Tom, Brambach knuckles are different than Kimball Knuckles! However, the = alignment is the same. I have a really olde Kimball Service Manual that = shows it. Unfortunately, the photos are really bad, so a scan will not = suffice. On this type of knuckle, there is a vertical "cut", (if you = will), the jack tip CENTER LINE should align with that "cut". (Easier = shown than explained.) I hope this helps. Best Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ec/72/78/34/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC