---------------------- multipart/alternative attachment On 15-jan-05, at 16:46, Piannaman@aol.com wrote: > > In a message dated 1/14/05 1:17:50 PM Pacific Standard Time,=20 > antares@euronet.nl writes: > OK, I use a big piece of cheap felt, about 1 inch thick, on which I = put > some teflon powder. > Wit my finger I push the powder into the felt so that it becomes a > smear. > Then I pull all the hammers upwards and apply the teflon by rubbing it > into and onto the rollers.\ > Just go along the rollers with the smeared surface of the chunk of=20 > felt. > It will stay a long time this way and it will hardly spill into the > action because you really rub it in. > Andre, > =A0 > An upright hammerhead works well, too.=A0 You can get a good grip on = it,=20 > too! > =A0 > Dave Stahl > (; >))) Alright man, I'll try it! friendly greetings from Andr=E9 Oorebeek Vita Dura Est ---------------------- multipart/alternative attachment A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 1695 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/32/93/a5/64/attachment.bin ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC