---------------------- multipart/mixed attachment --=====================_17076124==.REL --=====================_17076124==.ALT I support the pinblock and drive if the torque is OK. If not I tape under the pin hole and treat with CA glue. Andrew Anderson At 12:39 PM 12/19/2005, you wrote: >What method >Sleeping half-moon emoticon > do you use for setting tuning pins, particularly one that "jumps" > on an S&S grand? > --=====================_17076124==.ALT An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/54/ed/ee/95/attachment.htm --=====================_17076124==.ALT-- --=====================_17076124==.REL A non-text attachment was scrubbed... Name: 1048e65.gif Type: application/octet-stream Size: 291 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/e9/d8/64/ec/1048e65.gif --=====================_17076124==.REL-- ---------------------- multipart/mixed attachment ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC