This is a multi-part message in MIME format. ---------------------- multipart/mixed attachment A four inch sander (sixty-nine dollars) cut down to 3 1/4 inch and raised about 1/2 inch makes a good sander for the sides of the keys. Attached. Carl Meyer PTG assoc Santa Clara, Ca. ----- Original Message ----- From: "pianolover 88" <pianolover88@hotmail.com> To: <PIANOTECH@PTG.ORG> Sent: Tuesday, December 06, 2005 6:29 PM Subject: filing plastic keytop edges... > Since the nice old lady who was doing all my keytop replacement passed > away recently, I am now doing the work in my shop. Just wanted to ask the > list for tips on the best/fastest/safest method for filing the edges off > the molded keytops once the glue is dry. I've already filed the first 13 > using a standard bastard file, but maaaaan....it's a job! Especially since > there is so much excess hanging over the edges! Thanks! > > Terry Peterson > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > ---------------------- multipart/mixed attachment A non-text attachment was scrubbed... Name: key sander.jpg Type: image/jpeg Size: 247130 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/f5/f5/82/00/keysander.jpg ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC