This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment _____ From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Andrew and Rebeca Anderson Sent: December 05, 2005 10:13 AM To: Pianotech Subject: Re: Petrifying process of wood Petrification involves mineralization, usually water-born. Usually underground where aerobic bacteria can't thrive. A failed sound-board has more to do with structural compression damage to the wood fibers. Ie ten year old Chinese pianos with coastal spruce where the fat grain has dried out and the board collapsed. The wood has lost its "stiffness" and absorbs vibrations much more than it did when new. To a lesser degree this happens to old boards. Sometimes re-ribbing can revive a board. Shimming cracks that divide a board is another time-tested method. ... that does not work to either stiffen the original soundboard or to restore crown. Del ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/19/91/fb/73/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC