I was amazed recently at the stiffness of old soundboard material, as removed from a 1920's Packard, versus the softness and flexibility of a new Bolduc bnoard. Thump --- Farrell <mfarrel2@tampabay.rr.com> wrote: > So if I completely understand what you said, it is > impossible for a soundboard to become petrified > because the petrification appears after thousands of > years. > > Correct - and because petrification is a process of > mineral replacement facilitated by groundwater - ya > gotta bury the piano....... > > But I'm sure someone talked about this to explain > why an old soundboard could not remain as powerful > as a new one. > > I'm not the expert on that, but sure, there are many > reasons an old soundboard might not be as powerful > as a new one - cellular compression damage to the > panel, ribs warping, glue joints failing - > basically, deformation cause by loading and > atmospheric conditions. > > Wasn't it you BTW who said that in a past topic? > > I sure hope I have never said that "an old > soundboard could not remain as powerful as a new > one". I think it is unlikely, but I think one will > likely be proved wrong if one says never (or could > not) - there's always (er, well, usually) an > exception. > > Terry Farrell __________________________________ Start your day with Yahoo! - Make it your home page! http://www.yahoo.com/r/hs
This PTG archive page provided courtesy of Moy Piano Service, LLC