> Tuned a GH1 today, and noticed that the top two sections (capo) had no > felt between the front bearing bar and the tuning pins, allowing that > segment to vibrate. There is a well about 1/4" deep cast in the plate > in this area, but this area is flat, not convex, like the other plate > segments that have string underlayment felt right up to the bearing bar. > > Should it have string braid, or underlayment felt? I can see no > previous sign of either... and the treble unisons are hard to tune, > with that trashy noise... > > Recommended octave styles are also welcomed... it was about a 26-note > bass, with no wound strings on the treble. > > --Cy Shuster-- Don't mess with it. That treble noise is supposed to draw attention away from the low tenor while the tuning style sneaks out the back. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC