This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Tuned a GH1 today, and noticed that the top two sections (capo) had no = felt between the front bearing bar and the tuning pins, allowing that = segment to vibrate. There is a well about 1/4" deep cast in the plate = in this area, but this area is flat, not convex, like the other plate = segments that have string underlayment felt right up to the bearing bar. Should it have string braid, or underlayment felt? I can see no = previous sign of either... and the treble unisons are hard to tune, = with that trashy noise... Recommended octave styles are also welcomed... it was about a 26-note = bass, with no wound strings on the treble. --Cy Shuster-- Bluefield, WV ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d7/1e/29/ff/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC