This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment One other thing I almost always do - especially in cases where you can't = get at the applied epoxy to test hardness - is save the mixing container = with some left-over epoxy in it. That way you can test the left-over = epoxy for hardness the next day to be sure it cured properly. I do the = same thing when using urea-formaldehyde-based adhesives. Terry Farrell ----- Original Message -----=20 From: St=E9phane Collin=20 To: Pianotech=20 Sent: Friday, September 17, 2004 9:27 AM Subject: Re: Epoxy glue in Europe ? Thanks Kerry, Terry, Ric, Bernhard, Joe and David for your input. So next time I'll try to get the West System thing, and be sure to = wait for longer than advised. Best regards St=E9phane Collin ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/1c/b1/11/a1/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC