This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Joe, I had trouble getting the new bridge seperated from the preshaped scrap wood. The planer really squeezes them together. Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: Joe Garrett To: pianotech Sent: Sunday, October 24, 2004 10:48 PM Subject: Re: Copying damaged bass bridge John Ross said: "Well, what I did, was get a piece of scrap wood, and using double sided tape, attach it to the old bridge, making sure it was flat. Meaning wood splinters and glue sticking up, removed. I then ran it through the planer, ending up with a reverse of the old bridge. I then taped it to my new piece of wood, and ran it through the planer. I ended up with an exact replica of the old bridge. (As close as I can tell) No guessing involved. I figure, for me it was easier than sawing, or sanding. Let me know, what you think. Regards, John, Very ingenious! I didn't know double sided taped was strong enough to withstand the forces in a planer! I'll keep that one in mind, for sure! Best Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f5/d1/65/ab/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC