Are UV rays an issue on the typical piano soundboard? Terry Farrell ----- Original Message ----- From: "David Love" <davidlovepianos@comcast.net> To: "'Pianotech'" <pianotech@ptg.org> Sent: Wednesday, October 20, 2004 6:09 PM Subject: RE: Epoxy on soundboards > It doesn't much matter even if it dries with a flat glossy film. Epoxy > is UV sensitive so you still have to sand it (for adhesion) nd coat it > with a finish that has UV blocking or the epoxy tends to break down over > time. > > David Love > davidlovepianos@comcast.net > > -----Original Message----- > > >All the epoxie I have seen as a finish dries with little specks of dust > in > >it. Can you keep the dust from settling in it long enough to harden so > it > >is just a flat glossy film? > >James Grebe > > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC