Drill bit size for #1 gauge tuning pins

[David Love]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Yes, the bit.  
 
David Love
davidlovepianos@comcast.net 
-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf Of Erwinspiano@aol.com
Sent: Tuesday, October 05, 2004 7:25 AM
To: pianotech@ptg.org
Subject: Re: Drill bit size for #1 gauge tuning pins
 
   Davi
   WHat last longer? The bit?
   Dale:
I've been double drilling block since this first appeared on the list
about awhile ago.  It really does make a difference in terms of even and
controlled torque on the pins (assuming the pins are equal in
diameter-not always the case!) and takes away that stress of controlling
feed speed.  Plus, since the final bit takes out so little material,
they last longer.  
 
David Love
davidlovepianos@comcast.net 
 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0f/79/db/ff/attachment.htm

---------------------- multipart/alternative attachment--