Drill bit size for #1 gauge tuning pins

Erwinspiano@aol.com Erwinspiano@aol.com
Tue, 5 Oct 2004 10:24:43 EDT


---------------------- multipart/alternative attachment
=20
Davi
   WHat last longer? The bit?
   Dale:

I=E2=80=99ve been double  drilling block since this first appeared on the li=
st about=20
awhile ago.  It really does make a difference in  terms of even and controll=
ed=20
torque on the pins (assuming the pins are equal  in diameter=E2=80=94not alw=
ays the=20
case!) and takes away that stress  of controlling feed speed.   Plus, since=20=
the=20
final bit takes out so little material, they last  longer.   =20
=20
David  Love
davidlovepianos@comcast.net=20



=20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a0/24/56/9a/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC