This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Jurgen said: "Joe: =20 Check out my selection of bridge pin sizes." Jurgen Goering www.pianofortesupply.com Jurgen, Just did. The sizes needed are: #6=3D.076, #7=3D.086, #8=3D.096, = #9=3D.109, #10=3D.135!!! I saw none of these sizes. There were some that = were "close", but not sufficiently to get the job done w/o causing = problems. No offense, but I work on about 99% American Instruments. The = 1% European instrument would probably need your metric bridge pins, but = the rest? Sorry Jurgen. I am in your corner, but not on this one. As for my "Whine",Ron, I'll misquote Howie Mandel: It's my whine and = I'll do with it what I want! (so there)! PzStz! (bronx cheer).<G> Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/3f/22/83/84/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC