rebuilding decisions....etc.

Marcel Carey mcpiano@videotron.ca
Mon, 04 Oct 2004 07:10:10 -0400


Mark,
What I meant to say is that even after grinding the plate, you will
not have the same possibilities of adjusting the strike point as you
would have with a normal capo bar. In modern grands, the top treble
strike point is very close to the capo bar. Minute adjustments make a
lot of change in the way these notes sound. You will always be limited
with these aggraffes. Even after grinding, there will be a point where
the hammer felt will contact the aggraffe before or simultaneously and
what you will then get is a lack of power before the hammers actually
stick.
The only way to get around that is to file the hammers to a very sharp
point and laquer them so they don't change shape too quickly. Now all
you guys don't you get on my back with the laquer issue now. This is
for this specific top treble aggraffes arrangement.

Marcel Carey, RPT
Sherbrooke, QC

> -----Original Message-----
> From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On
> Behalf Of Mark Davidson
> Sent: October 4, 2004 6:51 AM
> To: Pianotech
> Subject: rebuilding decisions....etc.
>
>
> Joe Garrett wrote:
>
> >Marcel said: "It's impossible to grind the
> >plate unless grinding the base of the
> >aggraffes at the same time. You'll just
> >have to live with the last
> >octave that will never sound like a
> >modern piano."
> >
> >This is precisely what Chickering did on
> >many of his grands. Although it's a pain
> >in the rump, to grind that area, I've done
> >it! The agraffes, of course, need to be
> >in their proper place, before doing this
> >and there is a limit as to how much you
> >can grind off!<G> Also, one would need to
> >determine that there is a need for this
> >and to calculate the strike point needed.
>
> The high treble agraffes in this piano do not have
> the same cylindrical base as the lower notes.
> I think there is room for a bit of grinding,
> maybe a couple of mm, which might be all
> it needs.
>
> -Mark
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>


This PTG archive page provided courtesy of Moy Piano Service, LLC