---------------------- multipart/mixed attachment
-------------------------------1084410947
In a message dated 5/12/2004 4:10:28 PM Pacific Standard Time,
fordpiano@earthlink.net writes:
HI Phil
> I've only used one set on a 1933 Knabe 9ft. The product is good still
> developing> Ray is adjusting to the different aspects of the felt ie
> skiving it presseing procedure. I just recieved another 2 sets and they
> have a beautiful density & shape. It's very dense felt.
> I would prefer to give a feedback session after I install the next set
> on a smaller piano. 9ft's are such different animals and require more non
> standard techniques. However the pianos sounded big & powerful with a
> very wide dynamic range & the trouble spots in the scale improved
> dramtically. Very little juice & mainly in the bass. Lots of felt over
> the top.
What about needling? Did you do the tenderizing of the shoulder routine as
you would on a Renner hammer?
> Ray & I are experimenting with a few variables right now & will
> give an update and more accurate picture of the final product as soon as
> Ray is ready. I wouldn't hestitate a second to get some though as the
> supply is currently limited. More felt is on the way I'm sure.
> Regards--Dale
I've ordered a set to put on the Feurich that I have. So, I would
appreciate any info you care to share about voicing these, on list or off.
Phil
-------------------------------1084410947
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/fa/ed/49/b4/attachment.htm
-------------------------------1084410947--
---------------------- multipart/mixed attachment
An embedded message was scrubbed...
From: Phillip Ford <fordpiano@earthlink.net>
Subject: Re: Ronsen Hammers
Date: Wed, 12 May 2004 16:10:04 -0700 (GMT-07:00)
Size: 2343
Url: https://www.moypiano.com/ptg/pianotech.php/attachments/2a/63/31/7a/attachment.eml
---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC