I'm also curious about your question Ron. Sounds like this guy has his head on pretty straight! .......'Course, that's coming from me...... Terry Farrell ----- Original Message ----- From: "Michael Spalding" <spalding48@earthlink.net> To: "Pianotech" <pianotech@ptg.org> Sent: Sunday, May 02, 2004 10:12 PM Subject: Re: pinblock drilling angle, with pin bushings > > > > Now, why would you want to drill the block at 4°? > > > > Ron N > > I don't necessarily want to - it sort of complicates the process. But it > does allow the string to meet the pin at an angle that keeps the coil from > loosening, while preventing the string from climbing up the coil. I have > sometimes varied the angle to suit the individual piano. What angle do you > use? > > Mike
This PTG archive page provided courtesy of Moy Piano Service, LLC