--- "John M. Formsma" <john@formsmapiano.com> wrote: > Ajay, > > > How did you correct the loose bridge pins > > The traditional way is with epoxy which involves > removing the pins. > > Another way without removing the pins is to use thin > CA glue and let it > wick into the hole. It will fill the small voids. > > Before doing either of these, I would correct the > cause of the problem, > which is no humidity control. Then see if you still > have loose pins. > > John Formsma > > Hello List thanks for all the information on this subject will let you know as soon as I see the piano Thanks once again Ajay. > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives ===== Ajay Mistry ________________________________________________________________________ Yahoo! India Insurance Special: Be informed on the best policies, services, tools and more. Go to: http://in.insurance.yahoo.com/licspecial/index.html
This PTG archive page provided courtesy of Moy Piano Service, LLC