---------------------- multipart/alternative attachment In a message dated 3/6/04 8:07:34 AM Pacific Standard Time, michael@gambles.fsnet.co.uk writes: > You mentioned "lifting the strings" Could you explain the method, and the > Michael, I'll start off with a few tidbits. Others will undoubtedly jump in and offer a far greater wealth of knowledge. LIfting the strings is done to level them in relation to their neigbors and is done with a string hook(not to be confused with a stringing hook: see Schaff, or other similar catalogue). If the strings are not level, you will notice it in tuning(one string will sound softer or louder than its neighbors, for instance), uneven hammer wear, and voicing. What you're doing is hooking under the string near the hammer strike point, and pulling up rather firmly on the T-handle in order to alter the shape of the bend under a termination point, thus levelling it with its neighbors. It isn't possible to mate hammer with strings if the strings are not level with each other. Hope this helps, Dave Stahl ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/43/72/6a/48/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC