Joe, When I've ordered them, I didn't have to wait any longer than other parts. Could be he had some in stock. It's always worth a try. jeannie Jeannie Grassi, RPT Registered Piano Technician Island Piano Service mailto:jcgrassi@earthlink.net -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Joseph Garrett Sent: Thursday, April 29, 2004 1:28 PM To: pianotech@ptg.org Subject: Re: Upright Damper Felt Source Jon, I've got good new and bad news. The good news is that Renner does list 55mm and 67mm Bass dampers. The bad news is, that the Renner USA Catalogue doesn't list them. So....you need to special order them from Lloyd. And that is truly the bad new, because special orders like that usually take an exorbitant amount of lag time. It all depends on when Lloyd needs to send in an order. Oh, the numbers are: 488A (55mm) and 488C (67mm). Each has 3 pads per. I hope that helps. Best Regards, Joe Garrett, RPT, (Oregon) Captain, Tool Police Squares Are I _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC