Hi Tim, When you replaced the butts, did you ensure that the hammer, glue joint was good. I would assume that with a new set of butts, that it is only a couple that need repining? Did I hear on the list a while back, that some techs, repin the complete new set, to ensure uniformity? Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: "Pianotech" <pianotech@ptg.org> Sent: Friday, April 23, 2004 10:21 AM Subject: Re: Hammer wobble > And/or rebush if their state is beyond repinning. > > Terry Farrell > > > > Repin > > Joe Goss > > > > > I have replaced all of the butt flanges on a console that I am working > on > > > and found a few hammers to be quite wobbly. > > > Options? > > > > > Tim > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC