Thanks, John & others. >The holes are not driven all the way through to allow tapping the pins. That's kind of what I'd already assumed. Thanks for confirming it. >The height of the tuning pins controls the amount of downbearing on the >front bridge, so they do need to be a certain height. I hadn't really thought about that. I guess I'm just too used to pianos. :-) >I've forgotten what the correct height should be, but it has to do with >the deflection angle. Can you look at the others and get a general idea? Can (& will) do. Should have already done it! >Best I can do. :-) That's fine. You bought up something I "might" not have taken into account. Thanks. >John Formsma Avery
This PTG archive page provided courtesy of Moy Piano Service, LLC