HI Michael, I'll second what the others have said about the PTG website, and contacting your local university tech/RPT. Is you book the one written by Jay Cree Fisher? If so, it is dated, and rather sparse. A much better reference book would be "Piano Servicing Tuning & Rebuilding" by Arthur Reblitz. If you're serious enough about learning to study on your own, think about a correspondence course. Randy Potter's is the best of it's kind, www.pianotuning.com, lots of discussion about the pros and cons in the pianotech archives. Good luck, Mike > [Original Message] > From: Michael Bloom <michael.bloom@umontana.edu> > To: <pianotech@ptg.org> > Date: 4/14/2004 10:45:19 AM > Subject: What is the best way to become a Piano Technician? > > Hi, > > I have been looking out on the net and reading this list for a while. I > also have a book "Piano Tuning - a simple and accurate method for > amateurs". I have read through it and have done some regulation on my own > piano and been looking at other pianos to see if I could figure out what > was wrong. (Haven't changed anyone else's yet though). > > I was wondering what the best way to continue learning how to do tuning, > regulation and voicing, etc. I live in Montana and there are no schools > that I could go to in order to learn. I am also confused about the > certification process and what the final goal should be. > > Any direction you could give me would be very greatly appreciated. > > thanks, > michael bloom > Missoula, MT > michael.bloom@umontana.edu > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC