----- Original Message ----- From: "Jon Page" <jonpage@comcast.net> To: <pianotech@ptg.org> Sent: Sunday, April 11, 2004 3:13 PM Subject: Rough Regulation > Prior to 1992 the action spread was 112.5 mm. > > With the shank horizontal, that would be theoretical string height. > Subtract your l/o distance from that. > > Just for fun, assume your string height as derived above. > Measure hammer center height > measure hammer blow > > Hammer Center Height + Hammer Blow = String Height > > By manipulating this equation you can ascertain whether the brackets > require a shim underneath. > > Don't do much key leveling/dip work out of the piano. > > Regards, > > Jon Page, piano technician > Harwich Port, Cape Cod, Mass. > mailto:jonpage@comcast.net > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC