Agraffes for Mason Hamlin

[Phillip Ford]

I didn't think of that.  Maybe just dispense with the shank altogether and 
just epoxy the body of the agraffe to the plate.  Just make sure that the angle's right.

Phil Ford

>Not even with a judiciously placed glob of epoxy?
>
>Terry Farrell
>
>
> > >Do you think there's enough meat on a standard agraffe that you could cut
> > >off the shank and then drill and tap the body of the agraffe to accept a
> > >9/32x34 rod?
> > >
> > >Phil Ford
> >
> > Not in my opinion, besides the problem of threading a blind hole clear to
> > the bottom..
> >
> > Ron N