Not even with a judiciously placed glob of epoxy? Terry Farrell ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: "Phillip Ford" <fordpiano@earthlink.net>; "Pianotech" <pianotech@ptg.org> Sent: Thursday, September 25, 2003 3:09 PM Subject: Re: Agraffes for Mason Hamlin > > >Do you think there's enough meat on a standard agraffe that you could cut > >off the shank and then drill and tap the body of the agraffe to accept a > >9/32x34 rod? > > > >Phil Ford > > Not in my opinion, besides the problem of threading a blind hole clear to > the bottom.. > > Ron N > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC