bottom board crack

[Erwinspiano@aol.com]

---------------------- multipart/alternative attachment
In a message dated 9/3/2003 10:29:26 PM Pacific Daylight Time, 
cgpiano@humboldt1.com writes:

> Subj: bottom board crack 
>  Date: 9/3/2003 10:29:26 PM Pacific Daylight Time
>  From: <A HREF="mailto:cgpiano@humboldt1.com">cgpiano@humboldt1.com</A>
>  Reply-to: <A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
>  To: <A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
>  Sent from the Internet 
> 
> 
>          Carmen

             Plywood slats run across the crack. Glue and screw together.
            Dale Erwin

> 
>   At the risk of asking about a topic that has already been covered...
> 
>     What is the preferred method to repair a crack in the bottom board 
> of an upright (for clients who cannot afford to replace it)?
>   I have seen some repaired using a few steel "mending plates".  Are there 
> any repair techniques that YOU prefer?
> 
> Carman Gentile RPT
> Redwood Chapter
> 


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/46/82/6b/a6/attachment.htm

---------------------- multipart/alternative attachment--