Gosh, Conrad, I wish I'd thought of that while I was still at the piano - could have saved me from hauling the keys home. Customer-relations-wise, not sure I want to haul the keys back untouched and tell her I've decided to fix it a different way.... Oh well, next time I'll know what to do. Mike > [Original Message] > From: Conrad Hoffsommer <hoffsoco@martin.luther.edu> > To: Pianotech <pianotech@ptg.org> > Date: 9/3/2003 8:46:15 AM > Subject: Re: too-thick keytops > > At 09:19 9/3/2003 -0400, you wrote: > > Can't think of an easier way to get around your problem, anyone else? > > Mike Kurta > >----- Original Message ----- > >From: "Michael Spalding" <spalding48@earthlink.net> > >To: "Pianotech" <pianotech@ptg.org> > >Sent: Wednesday, September 03, 2003 8:22 AM > >Subject: too-thick keytops > > > > I've seen cloth punchings which were trimmed. The oval pins kept them from > spinning. A good scissors or knife would do the trimming, but even faster > would be a sharp chisel just outside the dent (or since the punchings are > new, remove the white keys and use the sharps as chisel guides.) > > I've not tried it myself... just musing... > YMMV > > > > Conrad Hoffsommer - Music Technician > Luther College, 700 College Dr., Decorah, Iowa 52101-1045 > Vox-(563)-387-1204 // Fax (563)-387-1076 > > - Education is what you get from reading the small print. Experience is > what you get from not reading it. > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC